FULAMENT Fula-Flex 3D Printing Resin Sheet - 200mm x 125mm Flexible Stainless Steel Build Plate for Creality Ender 3, Prusa i3 - Perfect for High-Detail Prints & Smooth Surface Finishing

The logo has been moved to the magnet, no logo on the steel plate. The magnet holds the steel plate so well that the plate would flex when removing it from the magnet and I had one piece pop off just trying to remove the plate. I appreciate a company that reads it's customers reviews and makes a change. The only thing I wish is that it came with the z stop shim so I didn't have to print on my new base before installing this. I highly recommend this product.I have fulament PEI sheets on my FDM printers and when I set up my SLA printer, i noticed the scrapers, sandpaper, and such that you are supposed to use with the included platform. All that to just get adhesion and pop the print off the plate. Nope! Once I saw the fulament plate for my printer I ordered it immediately. Worked perfectly. I left the print on the plate for washing in IPA and then pulled it out flexed the plate 3 times and pop, the figure came right off ready for curing. Exactly what I had hoped for!!Haven't had it long enough to say anything about the adhesive backed magnet but no issues with some 50hrs of printing.One thing of note is that there is only a small margin of clearance for the little tab on the plate to fit in the tank. For me it was ensuring the tab is pointing towards the back of the tank, otherwise it catches the inner lip. This could lead to damage but I do not see how to design around it, not having a tab would make removing the spring plate more difficult. Perhaps making it shorter and wider in future revisions would help.Leveling was easy, due to the spring loaded build assembly on the Mars 2p, no spacer is required. Just level the bed raise it up, attach the flex plate, and re-level. Easy, done.As far as the other reported issue of the logo being printed to the models, I have not seen this myself. I do typically print with skids or raised supports, and generally the build plate is the bottom of the model so I wouldn't care if it had a bit a print on it. Have not seen the logo on the bottom of the skids myself. It appears laser etched, and is smooth to the touch with the rest of the plate, your experience may vary.I use alcohol to clean and would not recommend immersing the magnet in a solution of any kind, as is typical in the cleaning units. It would likely cause more rapid wear on the adhesive.So in summary,Pros+ Works as advertised.+ Simple installation.Cons-Limited clearance with the grab tab requires attention to plate orientation prior to printing.I've resin printed at home for a few years. I was dubious at best of these spring plates at first. But after scraping, prying, and ruining prints and build plates I figured that I didn't exactly have much to lose. This stupid little magnet and sheet of metal probably saved me from giving up on a hobby that I otherwise enjoyed very much. Just remember to print up a spacer for the arm that catches the attention of the electric eye that tells your machine to stop lowering the plate since you are adding a couple millimeters of thickness.When I switched from standard resin to water washable resin I had issues with prints breaking and chipping while trying to remove them from the build plate. I have a flexible plate for my FDM printer and thought, I wish someone would make one for resin. Well, while I was looking for something else I ran across the Fula-Flex resin edition. I thought great, finally someone made one! I ordered right then and there. The installation was easy. I did have to make a small spacer because my printer wouldn't level the plate with the added thickness but it was worth it. You will lose about 2.6 mm of build height, but it's worth it. As of writing this review, I have only used it once but so far I am impressed. The print popped right off the plate after printing. No more chipping or breaking my models. I will say as impressed as I am with the product in my opinion I could be slightly thinner. The magnet is one of those flexible soft magnets. They are usually not too powerful so I am worried about slipping and durability. So far so good. Only time will tell how well it holds up to the abuse from the resin. I hope they continue to improve the product since it is fairly new product. The price is about right for the quality of the product. I plan to explore other products made by them.Been using this for over a year 0 (zero) issues with the build plate, the only thing is the logo imprints on the bottom of the print when you print directly on to the build plate.the force from prints that take up a large surface area moves the plate slightly. I've got a phrozen Sonic mini 4k